Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Rambus (RMBS) - Eagle or Penguin -- Ignore unavailable to you. Want to Upgrade?

To: NightOwl who wrote (48301)	7/29/2000 10:20:11 PM
From: Bilow	Read Replies (1) \| Respond to of 93625

Hi NightOwl; You're quite right. But power/heat generation depends strongly on how DRAM chips are used. All things being equal, I would think it would increase power by a significant amount, but they are also going to a more modern process, so that probably more than cancels the row size effect. This is under the assumption (which I have not carefully examined), that they are in effect increasing their row size and decreasing the number of rows. This is just my first guess, I could be completely wrong here. It really doesn't matter, RDRAM is quite dead. Generally speaking, power consumption is least when memories are organized to have more, but shorter, rows. The reason is that fewer memory cells (the tiny capacitors) have to be measured and then restored with each read or write cycle. Each access a DRAM has to write to many capacitors that were neither read by the memory controller nor written. The reason is that they have to read or write a whole row at a time. (Which is why they are called rows.) When the rows are longer, you get lots more power consumption. This effect is most seen when comparing the power consumption of x4, x8, and x16 chips. While the individual memory chips have rows of the same length (for a given process type), the total number of bits in a "DIMM" row differ depending on the organization. It takes 16 x4 chips to make a row, but only 4 of the x16 chips. This means that a row of DIMM made from x4 chips uses 4x the power of a DIMM made from x16 chips. -- Carl