Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : Booms, Busts, and Recoveries -- Ignore unavailable to you. Want to Upgrade?

To: smolejv@gmx.net who wrote (65823)	7/2/2005 4:48:12 PM
From: maceng2	Read Replies (1) \| Respond to of 74559

Well you can easily join your past generations cruising along the autobahn at 150 mph plus.. The top speed is electronically restricted to 250 km/h. seriouswheels.com Tailgating above 120 mph is just so not a fashion for those who wish to live long lives. safespeed.org.uk Besides we all know it's really aloominum

To: smolejv@gmx.net who wrote (65823)	7/2/2005 5:42:29 PM
From: Slagle	Read Replies (2) \| Respond to of 74559

Dolinar Re: "Aluminum" For a number of years mobile homes here in the south were wired with aluminum wire and I honestly think that eventually every last one of them with aluminum wiring eventually burned down. They were especially bad in that you had the overheating junctions in close proximity to very combustible varnished wall paneling. Very bad idea. There was a sort of bad joke back then among electricians that the aluminum wired trailer houses were a sort of scheme by the rich to kill off the poor. On the other hand, distribution buss bars in industrial buss duct is always aluminum bar, not copper and I have never heard of a problem. The buss bars are flat with bolted connection, flat to flat. The plug in disconnects never give a problem either, even in fairly corrosive environments, but there you have flat connections to the buss bar under considerable spring tension. WIth round wires twisted or even held by a lug the stiffness of the aluminum along with the high coefficient of thermal expansion really works on the junction. Oxide formation does the rest of the damage. Slagle