SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Plastics to Oil - Pyrolysis and Secret Catalysts and Alterna -- Ignore unavailable to you. Want to Upgrade?


To: scion who wrote (5623)3/15/2011 6:49:26 PM
From: SteveFRead Replies (1) | Respond to of 53574
 
"To avoid flaring the excess gas, the Company purchased a gas compression system in June 2010 that buffers and regulates the off-gas. The gas is then stored in mobile tanks and can be resold or used to cold start the P2O furnace."
...
"There have been many other additions to the P2O machine and facility since the last quarterly filing, all of which have been designed to increase efficiencies and improve operations. A second condenser was added to the P2O system so that there is one condenser to condense the heavy fuel (diesel) and another to condense the light fractions (gasoline)."


sec.gov

"A minor by-product of the process is an off-gas much like natural gas. The process consumes much less off-gas to operate than is generated when operating at maximum capacity. Further testing at high processing rates proved that all the off-gas could not be burned (temporarily for a stack test) in the process furnace. Flaring the excess off-gas is common in the oil and gas industry but is not environmentally friendly, would waste the fuel value, and would require a separate permit. To avoid flaring the excess gas, the Company purchased a gas compression system to buffer and regulate the off-gas to 1) resell or 2) to cold start the process. The gas compression system and mobile storage tanks were installed on the Company’s 20T Plastic2Oil processor in June 2010."
....
"...as well as approximately $140,000 for parts and equipment relating to P2O, including the off-gas compression system, a shredder and a granulator. "


sec.gov

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: BT-1
Tank Location: Aboveground - in contact with impervious barrier
Tank Status: In Service
Tank Install Date: 07/06/2010
Tank Closed Date:
Tank Capacity: 17850 gal......................
(old listing - Sep 2010)

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: WT-7
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: Closed - Removed
Tank Install Date: 07/06/2010
Tank Closed Date: 02/01/2011

Tank Capacity: 1200 gal........................
(old listing - Sep 2010)


5 Tanks Found

Tank No Tank Location Status Capacity (Gal.)
BT-1
Aboveground - No Contact (on saddles, legs, rack, cradle, etc.) In Service 18367
OT-2
Aboveground - No Contact (on saddles, legs, rack, cradle, etc.) In Service 10000
WT-3
Aboveground - No Contact (on saddles, legs, rack, cradle, etc.) In Service 375
WT-4
Aboveground - No Contact (on saddles, legs, rack, cradle, etc.) In Service 375
WT-7
Aboveground - No Contact (on saddles, legs, rack, cradle, etc.) Closed - Removed 1200


dec.ny.gov

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: BT-1
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: In Service
Tank Install Date: 02/10/2011
Tank Closed Date:
Tank Capacity: 18367 gal.
Product Stored: Diesel
Percentage: 100%
Tank Type: 01 - Steel/Carbon Steel/Iron
Tank Internal Protection: Other
Tank External Protection: Urethane
Tank Secondary Containment: Diking (Aboveground)
Tank Secondary Containment: Modified Double-Walled (Aboveground)
Tank Leak Detection: Interstitial - Manual Monitoring
Overfill: Other
Spill Prevention: Catch Basin
Dispenser: None
Pipe Location: Aboveground
Pipe Type: Steel/Carbon Steel/Iron
Pipe External Protection: Painted/Asphalt Coating
Piping Secondary Containment: None
Piping Leak Detection: None
Tank Next Test Due:
Tank Last Test:
Tank Test Method: Testing Not Required

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: OT-2
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: In Service
Tank Install Date: 02/15/2011
Tank Closed Date:
Tank Capacity: 10000 gal.
Product Stored: Diesel
Percentage: 100%
Tank Type: 01 - Steel/Carbon Steel/Iron
Tank Internal Protection: None
Tank External Protection: Painted/Asphalt Coating
Tank Secondary Containment: Modified Double-Walled (Aboveground)
Tank Leak Detection: Interstitial - Manual Monitoring
Overfill: Other
Spill Prevention: Catch Basin
Dispenser: Suction
Pipe Location: Aboveground
Pipe Type: Steel/Carbon Steel/Iron
Pipe External Protection: None
Piping Secondary Containment: None
Piping Leak Detection: None
Tank Next Test Due:
Tank Last Test:
Tank Test Method: Testing Not Required

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: WT-3
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: In Service
Tank Install Date: 02/15/2011
Tank Closed Date:
Tank Capacity: 375 gal.
Product Stored: Diesel
Percentage: 100%
Tank Type: 01 - Steel/Carbon Steel/Iron
Tank Internal Protection: None
Tank External Protection: Painted/Asphalt Coating
Tank Secondary Containment: Modified Double-Walled (Aboveground)
Tank Leak Detection: Interstitial - Manual Monitoring
Overfill: High Level Alarm
Spill Prevention: Catch Basin
Dispenser: Suction
Pipe Location: Aboveground
Pipe Type: Steel/Carbon Steel/Iron
Pipe External Protection: Painted/Asphalt Coating
Piping Secondary Containment: None
Piping Leak Detection: None
Tank Next Test Due:
Tank Last Test:
Tank Test Method: Testing Not Required

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: WT-4
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: In Service
Tank Install Date: 02/15/2011
Tank Closed Date:
Tank Capacity: 375 gal.
Product Stored: Diesel
Percentage: 100%
Tank Type: 01 - Steel/Carbon Steel/Iron
Tank Internal Protection: None
Tank External Protection: Painted/Asphalt Coating
Tank Secondary Containment: Modified Double-Walled (Aboveground)
Tank Leak Detection: Interstitial - Manual Monitoring
Overfill: High Level Alarm
Spill Prevention: Catch Basin
Dispenser: Suction
Pipe Location: Aboveground
Pipe Type: Steel/Carbon Steel/Iron
Pipe External Protection: Painted/Asphalt Coating
Piping Secondary Containment: None
Piping Leak Detection: None
Tank Next Test Due:
Tank Last Test:
Tank Test Method: Testing Not Required

Site No: 9-601203
Site Name: JBI RE #1 INC.
Tank No: WT-7
Tank Location: Aboveground - No Contact (on saddles, legs, rack, cradle, etc.)
Tank Status: Closed - Removed
Tank Install Date: 07/06/2010
Tank Closed Date: 02/01/2011
Tank Capacity: 1200 gal.
Product Stored: Diesel
Percentage: 100%
Tank Type: 01 - Steel/Carbon Steel/Iron
Tank Internal Protection: None
Tank External Protection: Painted/Asphalt Coating
Tank Secondary Containment: None
Tank Leak Detection: Impervious Barrier/Concrete Pad (A/G)
Overfill: High Level Alarm
Overfill: Product Level Gauge (A/G)
Spill Prevention: None
Dispenser: Suction
Pipe Location: Aboveground
Pipe Type: Steel/Carbon Steel/Iron
Pipe External Protection: None
Piping Secondary Containment: None
Piping Leak Detection: None
Tank Next Test Due:
Tank Last Test:
Tank Test Method: Testing Not Required