Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : 3D Printing -- Ignore unavailable to you. Want to Upgrade?

To: Glenn Petersen who wrote (516)	8/30/2014 10:20:03 PM
From: FJB	Read Replies (2) \| Respond to of 902

3D-printed 'bump keys' are a tech-savvy lockpicker's best friend engadget.com We've all locked ourselves out of our homes or offices at least once, but what do you do when there aren't any handy spare keys laying around? Well, seeing as how we live in the future, you could always 3D print one. Printing a plastic replica of a key you've already got in your possession is a piece of cake, but the real trick for the curious and the criminal alike is figuring out how to print a key that'll open locks without having an original key on hand. Wired spoke to a pair of lockpickers who did just that -- with just a photo of a keyhole, some understanding of the lock's depth and a bit of crafty purpose-built software called Photobump, security consultants Jos Weyers and Christian Holler can print so-called "bump keys" that allow them to jimmy open nearly any lock with just a bit of elbow grease. Haven't heard of bump keys before? Long story short, they're specially filed keys that you slip into a keyhole and hit with a mallet. Why? The energy from that thump is transferred up from the key's grooves and into the two layers of pins that normally keep the lock from rotating -- if you strike the bump key just right while trying to turn it, that top layer of pins will leap out of the way long enough for you to unlock the whole shebang. If that sounds a little too easy, well, you've got a point. Thankfully, Weyers and Holler aren't trying to sell their tech to the highest, most nefarious bidder -- they're instead trying to coax manufacturers into crafting locks that can better resist these sorts of techniques.