SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : AC & All Home Appliances -- Ignore unavailable to you. Want to Upgrade?


To: robert b furman who wrote (443)10/23/2018 9:27:38 PM
From: Alan Smithee1 Recommendation

Recommended By
goldworldnet

  Respond to of 678
 
Whenever I do a plumbing project, I laugh but it turns out true - it takes me 3 trips to Menards or Home Depot.
In my house, that’s not limited to plumbing. Just about any project. And if it’s a motorcycle I’m working on, it sometimes takes 4 trips, especially if it’s electricals I’m working on.



To: robert b furman who wrote (443)10/24/2018 3:36:54 PM
From: locogringo1 Recommendation

Recommended By
goldworldnet

  Read Replies (1) | Respond to of 678
 
- it takes me 3 trips to Menards or Home Depot.

I buy extra parts on the 1st trip now since I know I'm going back 2 or 3 times anyway. I now have to do that with gutter and downspout angles lately. I don't know how they change from flat to side bend while I'm driving to Menards.



To: robert b furman who wrote (443)10/24/2018 3:42:31 PM
From: locogringo1 Recommendation

Recommended By
goldworldnet

  Read Replies (2) | Respond to of 678
 
Go bless circuit breakers !

Be safe and test the wires for voltage anyway even after throwing the breaker. I got thrown 3 feet across the basement once when I assumed the outlet was dead because one light on the same circuit went out. The box was still hot. I learned the hard way. Some electricians will cut corners or plan it that way.