Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Microcap & Penny Stocks : VLVT (was CSMA) -- Ignore unavailable to you. Want to Upgrade?

To: TraderGreg who wrote (7294)	5/24/1998 1:22:00 PM
From: Kurt N	Read Replies (1) \| Respond to of 11708

The concrete slab part sounds easy. What is entailed in capping the adjoining wells?? Is it simply putting a special type of cover and using some permanent adhesive?? Is the lining, something put around the base part of the well on the ground?? Would the 'well' we are talking about here be similiar (except maybe bigger/smaller in size) to a water well (except without the water bucket)?? Even if they did everything required, they still would need approval from the appropriate governmental agencies (permits & inspections which could take time). Maybe the holdup is with the local government?? Kurt

To: TraderGreg who wrote (7294)	5/24/1998 1:34:00 PM
From: Blackie D	Read Replies (1) \| Respond to of 11708

TG, The contractors would really enjoy the easy part comment. Even pouring a slab, capping adjoining wells, and lining to avoid seepage have to be performed within government standards, or the whole project could be turned on it's ear. It's really rediculous the way our government demands perfection when working with them, but the payoff in the end is usually well worth the extra effort. To us, these upgrades do seem minor, but to the Authorities who are in control, this is no laughing matter, we will comply, or else. I really believe this is the real hangup, along with the other points you mentioned, also. Blackie ps and, of course, the inspections after the work is finished. Why doesn't this get mentioned in PR's?