Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : TA-Quotes Plus -- Ignore unavailable to you. Want to Upgrade?

To: Bob Jagow who wrote (5721)	8/1/1998 1:55:00 PM
From: Monty Lenard	Respond to of 11149

Hi Bob, I have read the Help F2 info but .... It may be just a problem with this machine. Will not pass judgement until I try it on another one. This one is Win98 and the problem may be there. Have QP2 on a removable harddrive that I move around between Win98 & Win95 machines (that way I have the charts where ever I go.) Will see if Win95 gives the same problem when I get back to the office. The overlay with lists works fine on everything except the !ID100,!ID101 etc. In other words I can bring up a "custom" list I have created and overlay an Index such as !SPX...no problem. I just can't make the !ID100 etc. display a list. It's is almost as if I have changed to hotkeys F1-F3 to close the QP2 program.. Could be a defective keyboard also. Who knows?? But, hey, its no big deal. Message 5384024 Thanks, Monty

To: Bob Jagow who wrote (5721)	8/1/1998 5:16:00 PM
From: Alton Stephens	Read Replies (2) \| Respond to of 11149

Bob, I have a whole slew of questions about the virtual interface and setting it up for use with GET and AIQ. Here are some of my questions; any help would be appreciated: It appears that QP2 will not read AIQ data symbols- how am I going to get AIQ to work with QP2? Am I going to be able to do without Telescan data if I want to keep using AIQ? Is GET going to soon read QP2 data directly? How do you get GET to read all the QP2 symbols? Create a virtual folder for all the QP2 symbols? Folks, a couple more questions. [1] I cannot figure out how to get the cursor to appear as crosshairs- I selected that option but the cursor remains an arrow. Am I missing something? [2] Secondly, as to Virtual setup. I finally got that figured out and it works very well in Metastock using the QP2 lists like SP500 etc. Is it possible to create a list without running a scan? I would like to manually create some specific lists. [3] Will GET read the virtual data path? I presume so and will check this in a minute. [4] Lastly, I would very much like to make AIQ read the virtual data path but don't have a clue as to how to make that happen. Do I import all my AIQ symbols into a virtual folder? Many of the AIQ symbols are not going to be recognized by QP2, although I presume most of the stock symbols will be. If I can get all this sorted out, I will be able to drop Worden and Telescan data for a savings of about $80 a month, so any help you can give will be greatly appreciated! Thanks! Al