Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Intel Strategy for Achieving Wealth and Off Topic -- Ignore unavailable to you. Want to Upgrade?

To: Gerald Walls who wrote (20875)	9/6/1998 12:13:00 AM
From: David M Gambs	Read Replies (1) \| Respond to of 27012

Gerald, Set bus speed to 66 MHz and multiplier to 4.5. 1. Is 4.5 the correct multiplier? 2. Were the drives attached & configured correctly? 3. Is the memory installed in the correct banks? (like pairs, largest in bank 0) 4. Will PC-100 memory work with 66MHz? 5. Make sure that all cables are installed correctly - not flipped or off a pin. 6. Have you tried with the drives attached with the new memory? 7. Is there a keyboard attached? I haven't done much down at the hardware level in many years so I am reaching back a ways. Also, I am not totally familiar with all the new hardware so some questions may have self-evident answers to someone more familiar with the current hardware. Regards, dmg (Go INTeL® Go to $200 - [post all splits: past, present & future])