SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Non-Tech : Iomega Thread without Iomega -- Ignore unavailable to you. Want to Upgrade?


To: David Colvin who wrote (5792)1/13/1999 1:19:00 PM
From: Philip J. Davis  Read Replies (3) | Respond to of 10072
 
David,

>>So how did you deal with the 25 pin connector that is included with the zip + drive?<<

I purchased a 50HD-25D adapter, as well as a 25pin SCSI gender changer. Connected both together. This provides the necessary adapter between the 50 pin SCSI-2 cable coming from my external Jaz2 drive and the 25 pin Zip+ cable that goes to the Zip+ drive.

Here's a picture I took of the setup:

geocities.com

>>I will have to read the manuals to figure out how to terminate the last device on the chain<<

I thought the Zip+ had automatic termination.

regards,

Lipo