Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: Spots who wrote (5507)	1/23/1999 8:30:00 PM
From: Nazbuster	Read Replies (1) \| Respond to of 14778

Spots, re: BIOS passwords... There is a jumper on all mboards (I think) which "shorts" the BIOS. Put the jumper on pins 2-3 for 5 seconds and you reset the CMOS to the factory settings. As you say, so much for security.... The ABIT BH6 shows it in the manual.

To: Spots who wrote (5507)	1/23/1999 8:34:00 PM
From: Nazbuster	Read Replies (1) \| Respond to of 14778

To all... Need some Windows NT help: I'm trying to set up DialUp Networking in WinNT using my Motorola Bitsurfr Pro ISDN modem to reach the internet through an ISP. On Windows 95, the specifications allow me to say that the IP will be assigned by the ISP as will the Domain Name Servers (DNS). On NT, I seem to get only two choices: DHCP Server-assigned IP addresses, or static IP addresses. I don't know how to define the similar setup that works on W95. Can anyone point me in the right direction to do dial-up networking (TCP/IP) through an ISP using Windows NT, but without static IP addresses?

To: Spots who wrote (5507)	1/23/1999 9:04:00 PM
From: Dave Bissett	Read Replies (1) \| Respond to of 14778

Since OC'ing my 300A to 450 print commands are occasionally causing my system to crash, i.e. I get a power interruption. This has also occured once or twice when I power up the printer while the puter is on. I'm stumped by this, tho, since the puter and printer are plugged into different circuits. Would the voltage setting on the MB have anything to do with this? I left it at 2.0. Any ideas appreciated, since having to print anything is beginning to cause mild anxiety attacks(g). Dave