SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: Clarence Dodge who wrote (7016)4/12/1999 10:51:00 PM
From: Zeuspaul  Respond to of 14778
 
I wanted to make sure this NT install had only one place to go so I disabled everything else. That was a very good lesson here on the thread. It worked w/o any problems, well almost, thank God. I say almost because I inadvertently also disconnected my cdrom ide 2 slave and couldn't run the nt cd until I realized that. Nice thing about these removables to disable them just turn the key no rumaging around inside the box following ribbon cables.

Now I am jealous.

Zeuspaul



To: Clarence Dodge who wrote (7016)4/12/1999 10:56:00 PM
From: Zeuspaul  Read Replies (4) | Respond to of 14778
 
You can have Bios auto detect your CPU Clock ratio by just selecting 450/100 or you can select manual> CPU Clock :100MHz and CPU Clock Ratio: 4.5.

So why are the ABIT boards favored for overclocking? Is it because the voltage can be adjusted on the ABIT boards?

Zeuspaul


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News