AC & All Home Appliances | Stock Discussion Forums

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes
AC & All Home Appliances

An SI Board Since September 2018

Posts	SubjectMarks	Bans
678	62	0

Emcee: goldworldnet	Type: Moderated

Introduction Compact

Go to reply# or date (mm/dd/yy):

Reply	Message Preview	From	Recs	Posted
428	The big advantage of apartments is the owner being responsible for taxes and mai	goldworldnet	-	10/22/2018
427	HI Josh a vice grip would work also just do not crush it when tightening. Spr	robert b furman	1	10/22/2018
426	Good luck getting them off. Since I own an apt house, I have to deal with more	Hoa Hao	5	10/22/2018
425	Thanks for posting that. I have a Flushmate in the master bathroom toilet, but i	Stan	2	10/21/2018
424	Generally I do my repairs if possible and since I'm retired there's not	goldworldnet	1	10/21/2018
423	Its too bad that a 10 min job is turning out to be a nightmare. We disconnecte	SI Ron (Crazy Music Man)	1	10/21/2018
422	Tried WD-40 and some special penetrating oil. Didn't try a torch because the	goldworldnet	-	10/21/2018
421	Heat will melt the solder.	SI Ron (Crazy Music Man)	1	10/21/2018
420	Did you try WD-40? Heat?	Alan Smithee	1	10/21/2018
419	google.ca.	longz	1	10/21/2018
418	My issue was disconnecting the washing machine hoses that had fused with the fau	goldworldnet	-	10/21/2018
417	I would use a large pair of pliers to torque them tighter. Yup. Use channel loo	Alan Smithee	2	10/21/2018
416	Hi Josh, They make not be hexagonal as a precaution to prevent over torquing.	robert b furman	5	10/21/2018
415	I have decided to replace the laundry room faucets because they're old, but	goldworldnet	1	10/21/2018
414	It was hard to remove the old hoses and want connectors with flat sides a wrench	locogringo	7	10/21/2018
413	I had to cut one of the old hoses off with a dremel tool. The other hose I manag	goldworldnet	-	10/21/2018
412	I did a search on Amazon, I think all these hoses have those ends. I would use	SI Ron (Crazy Music Man)	2	10/21/2018
411	My last effort will be to go to a large plumbing supply, but am not optimistic.	goldworldnet	-	10/21/2018
410	Josh if you go to your appliance store, they all have part departments and they	SI Ron (Crazy Music Man)	-	10/21/2018
409	I'm having trouble finding washing machine hoses I want. It was hard to rem	goldworldnet	-	10/21/2018
408	Exploding toilets force recall of pressure-assisted flushing system WCBD	FJB	4	10/20/2018
407	tanks!	longz	-	10/19/2018
406	Lots of exercise I mean a lot of exercise You have to tire Jack out! Never	Pogeu Mahone	1	10/19/2018
405	Just offering this FWIW. I've lost a little over 15 lbs since spring. Same	Ken Adams	2	10/19/2018
404	Cut carbs/sugar.	Alan Smithee	2	10/19/2018

Go to reply# or date (mm/dd/yy):