SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: mowa who wrote (4959)1/12/1999 11:41:00 AM
From: Sean W. Smith  Read Replies (3) | Respond to of 14778
 
Sounds like you have DOA mobo. assuming its getting power. I had one. Verify the CPU Fan comes on. If so you have power to the MOBO. It should always at least beep. If it doesn't beep you need a replacement. You might consider calling Abit as a final measure. I did and they instructed me to have my board replaced.

Sean



To: mowa who wrote (4959)1/12/1999 1:08:00 PM
From: Spots  Respond to of 14778
 
Minotaur reports that about 10% of BH6s are DOA. If Funk's is,
the % on this thread will be considerably higher {:



To: mowa who wrote (4959)1/16/1999 5:45:00 PM
From: Zeuspaul  Read Replies (2) | Respond to of 14778
 
ABIT BH6 "PN1" pins 8-9,

The manual does not indicate if pin 8 or pin 9 is the +(red) lead. Does it make a difference?

Zeuspaul


HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News