Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC ) -- Ignore unavailable to you. Want to Upgrade?

To: jw who wrote (5020)	1/14/1999 9:36:00 AM
From: Clarence Dodge	Read Replies (2) \| Respond to of 14778

All You remember Bigboy...from about a thousand posts ago?<g> Well, he's running nice oc'd to 450 mhz at 2.03 v. With the Courier v90 hooked up Im really impressed with this machine.... very snappy and solid. Me and Bigboy and Mr NT ( with w98 living down the road in the other house<g>) are getting along quite nicely, so far. I'm thinking some additional burn in wouldn't be a bad idea for my machine. . Jon was rushing to get machine out before his Xmas break so I doubt a really full burn in was performed. I thought Dan had mentioned something downloadable to use but I can't find that post now. I think it was a mathmatical app. Maybe it was some one else. Dirk maybe? Any way, any suggestions for a good downloadable burn in app? Also I didn't see my fav fonts amongst the 25 in the NT fonts folder. Any suggestions where to go for free fonts? I haven't looked in the w98 fonts folder. But that brings another question to mind. Say I find the fonts I want in w98 on the other drive. How do I bring them over to the nt drive since my two drives are not accessible from each other? My actice drive is always C and the other one is always D and not accessable. Clarence

To: jw who wrote (5020)	1/20/1999 7:55:00 PM
From: jw	Read Replies (3) \| Respond to of 14778

Thread, Anyone, HELP PLEASE!. Have completed assembly. BH6,300a, 64MB PC100 CAS2. New HDD, New LS120, New CDROM, ATI Expert98 (thanks Dave) AGP Card Installed. Have 95/98 Boot disks galore. Using old 15" SVGA temporarily to get up to speed. How do I get the monitor screen to show anything about the Setup? With no ATI Expert98 Driver loaded, unaware how to load it, I'm stumped. When I turn on, I get couple green lights on CDROM, couple green lights on LS120, no beeps, the HDD LED shows steady, Power LED shows steady. PS fan turns, extra case fan turns, CPU fan turns. Push power switch nothing. Hold Power switch in for 4 or longer seconds, unit shuts off. Does this indicate I don't have a DOA MOBO? Jon set it at 2.0 volts, 450 MHz, tested for 30 minutes. TIA /jw ps; keyboard blinks couple times, also have new mouse