Cyrix 1 Where anything goes | Stock Discussion Forums

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks
Cyrix 1 Where anything goes

An SI Board Since December 1996

Posts	SubjectMarks	Bans	Symbol
640	1	0	CYRX

Emcee: Mark A. Forte	Type: Unmoderated

Introduction Market Data Compact

Go to reply# or date (mm/dd/yy):

Reply	Message Preview	From	Recs	Posted
590	Mark, I have been running reliably now for some time at 3x66 (yes 200MHz). No	Steve Porter	-	6/12/1997
589	Am I reading you right? Are you triple clocking? I've had people warn me a	Mark A. Forte	-	6/12/1997
588	Mark, Yes you can run a 2.8v core at 3.3v. It's really no different that	Steve Porter	-	6/12/1997
587	Fuchi, If Cyrix does good , gains acceptance , and it's stock price go	Jeff Kirk	-	6/12/1997
586	Such as?	Investor A	-	6/11/1997
585	You mean you can run a 2.8 v core at 3.3v I'm always afraid of frying a cp	Mark A. Forte	-	6/11/1997
584	Investor A , It occurs to me that some of the "Cyrix fans" on Cyrix-	Jeff Kirk	-	6/11/1997
583	Hey, Stevie! With courteous response --KID! Learn some manners before you get	Don	-	6/11/1997
582	Jeff, <i>I drilled some holes in the lower front pannel of the pc and gr	Investor A	-	6/11/1997
581	Steve , According to my mb manual , 66mhz is the fastest bus speed so I can	Jeff Kirk	-	6/11/1997
580	Bob G. I can't believe you guys.. read my posts about the 2.8V parts and 3	Steve Porter	-	6/11/1997
579	Mark, <i> Don't buy the newer P166L because it needs 2.8v. </i>	Steve Porter	-	6/11/1997
578	Jeff, You wanna hear a good one.. if you're not planning on holding onto t	Steve Porter	-	6/11/1997
577	mike, I'm not sure about you system config, but it could be the voltage re	Steve Porter	-	6/11/1997
576	Don, Do me a favour and get lost.. Steve	Steve Porter	-	6/11/1997
575	Fuchi, Remarked IBM P200+? You might want to tell IBM about that. Jim	Jim McMannis	-	6/10/1997
574	PC Chip just came out with another motherboard M537 which uses the re-labeled S	Investor A	-	6/10/1997
573	Jeff, Go for Cyrix 6x86-P200+ instead of P166+ with a few dollars more. If you	Investor A	-	6/10/1997
572	The Chip Merchant has the older 686 p166+ for $84 . I think I'll get one	Jeff Kirk	-	6/10/1997
571	Clock setting check you motherboard manual to be sure I think the P166+ has a	Mark A. Forte	-	6/9/1997
570	Upgrade to P166+ Check if your board provides 2.8v and 3.4v settings. If it do	Mark A. Forte	-	6/9/1997
569	Yeah, you can get a voltage adapter here. powerleap.com	FJB	-	6/9/1997
568	Isn`t there an add on power supply available to get 2.8v?	Jim McMannis	-	6/9/1997
567	If your board does not support 2.8V, then you will have to buy one of the older	FJB	-	6/9/1997
566	Thanks Mark , 66mhz is it's fastest setting . If I get a 166+ , is there	Jeff Kirk	-	6/9/1997

Go to reply# or date (mm/dd/yy):