Cyrix 1 / NSM 1 where hardware goes | Stock Discussion Forums

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks
Cyrix 1 / NSM 1 where hardware goes

An SI Board Since September 1997

Posts	SubjectMarks	Bans	Symbol
300	0	0	CYRX

Emcee: Mark A. Forte	Type: Unmoderated

Introduction Market Data Compact

Go to reply# or date (mm/dd/yy):

Reply	Message Preview	From	Recs	Posted
250	Fuchi, Thanks for response on the main Cyrix thread. I am going to buy yet an	Joe NYC	-	2/27/1998
249	Fuchi, re:>>I noticed that it is much slower than my other 486 boards<	steve h	-	2/26/1998
248	Steve H., PC-Chip is the world largest PC motherboard manufacturer while their	Investor A	-	2/26/1998
247	Fuchi, re: >>You are a funny man. You have been asking our helps on Moth	steve h	-	2/26/1998
246	Steve H., You are a funny man. You have been asking our helps on Motherboards,	Investor A	-	2/26/1998
245	Fuchi, Can you give me any info on the overclockability of this motherboard? Wh	steve h	-	2/26/1998
244	<Mark, Thanks for the suggestions, but my chip is a true 166Mhz rated at Pr2	Mark A. Forte	-	1/24/1998
243	Fuchi, thanks for the leads. I'll read the material at Tom's and Tweak	Bill Rau	-	1/24/1998
242	Mark, Thanks for the suggestions, but my chip is a true 166Mhz rated at Pr200.	Bill Rau	-	1/24/1998
241	Board setup with P166 Try a 2.5X60mhz overclock. This will make your cpu run l	Mark A. Forte	-	1/23/1998
240	Bill, You might take your overclocking lessons from: The overclocking Guide f	Investor A	-	1/23/1998
239	To all, I have just acquired a 6x86mx-166mhz chip, a Shuttle Hot 603 Mobo,and F	Bill Rau	-	1/23/1998
238	Joe, <i>Can m2 work under 3x multiplier? </i> Both 6x86 and M2 wo	Investor A	-	1/22/1998
237	To all, Has anyone overclocked 188 MHz M2-233? Any ideas on differences betwe	Joe NYC	-	1/22/1998
236	Overclock M2 I think there is a timing problem with the DIMM. It works fine @	Mark A. Forte	-	1/21/1998
235	Mark, If your M2 could clock at 66x2.5, you should run it at 83x2 on VXPro. I	Investor A	-	1/21/1998
234	Thank you for your response. I tried 2.5X66 and it seems to work well. My spee	Mark A. Forte	-	1/21/1998
233	Mark, Did you switch the jumper for DIMM from the default 5.0V to 3.3V? I hav	Investor A	-	1/20/1998
232	Ghost works fine. Be careful of their trial version. On another note, I bot a	Mark A. Forte	-	1/20/1998
231	Mark, Let me know how it went with Ghost. I may be doing something similar so	Joe NYC	-	12/22/1997
230	To All Win95 problem Thanks for all helpfull suggestions. I will try Ghost. Th	Mark A. Forte	-	12/21/1997
229	I have done this without any additional software. The first couple of times I	Scott Sterling	-	12/21/1997
228	Mark, There is another product called Ghost. It will take the image of your d	Joe NYC	-	12/21/1997
227	Mark, Try the product "DISK COPY". I don't remember the manufac	Goutam	-	12/21/1997
226	mark, when i've done this i did a full tape backup with the registry and th	steve h	-	12/21/1997

Go to reply# or date (mm/dd/yy):